AgingTreatment相关论文
Atomic-scale characterization of multiple precipitating species in a precipitation-hardened martensi
Multiple precipitating species in a 2.2 GPa grade precipitation-hardened martensitic stainless steel with balanced ducti......
The influence of rare earth Y on the microstructure and mechanical properties of Al-Zr alloy produced by dynamic ECAE wa......
σ-Phase Precipitation Mechanism of 15Cr-15Ni Titanium-Modified Austenitic Stainless Steel During Lon
The σ-phase precipitation in 20％ cold-worked 15Cr-15Ni titanium-modified austenitic stainless steel was studied during l......
...
Interfacial IMC Growth and Nanomechanical Characterizations of Solder in Sn-16Sb/Cu Joints during So
The effects of aging time and temperature on the formation and growth behavior of interfacial intermetallic compound (IM......
Effects of Aging Treatment on Intergranular Corrosion and Stress Corrosion Cracking Behavior of AA70
In order to study the effects of aging treatment on the intergranular corrosion(IGC)and stress corrosion cracking(SCC)of......
Effect of Laser Scanning and Aging Treatment on Microstructure and Property of Austenitic Heat-resis
In order to improve surface properties,High chromium austenitic base heat-resistant cast steel was scanned with a 5 kW c......
It is a mode of 7th International Conference on Surface Engineering. AISI 321 stainless steel was salt bath nitrided at ......
The factors affecting dimensional accuracy and precision of retention of lathe body castings are material rigidity,resid......
Powder metallurgy method was used to prepare copper alloy nanocomposites (CuCrZr/AlN) with high strength and conductivit......
α2 phase precipitation behavior and tensile properties at room temperature and 650℃in an(α+?)titaniu
The microstructure,room temperature and 650℃tensile properties of an(α+β)titanium alloy were investigated after aging......
Effects of on-line solution and off-line heat treatment on microstructure and hardness of die-castin
The effects of on-line solution, off-line solution and aging heat treatment on microstructure and hardness of AZ91D ......
采用高分辨透射电镜(TEM)、X射线衍射仪(XRD)和硬度测试等手段,研究快速冷冲后时效过程中喷射成形细晶Al-Cu-Mg合金中长片状S'相的......
The microstructure evolution and mechanical properties of the 316H stainless steel weld metals with different C contents......
以2090铝锂合金和2090＋Ce铝锂合金（添加微量稀土元素Ce）两种合金板材为研究对象，结合两合金人工时效过程中脱溶沉淀相的定量分析和不同......
分析了６０６３铝合金人工时效时的组织结构变化，研究了不同的时效温度和时效时间对６０６３铝合金性能。时效后硬度可达７５ＨＶ以上。......
